Socket Harness
Knowing About Cable Harnesses, Surface Mount Components and Sockets
While talking about circuit boards that have customary through-hole electronic machinery, many people nowadays, robotically compare circuit boards by placing of electronic parts via wire leads and holes present in the board. This technique of producing circuit’s boards and electronic components is older one and is now replaced by surface mount components. It may surprise some people that the surface mount components technology is present for almost twenty five years now. Also called as SMT; this type of technology puts electronic parts on the circuit boards and fixes them directly on to the circuits boards. Allowing for newer and better change that means, it is enabling us to build smaller components and hence ending up making smaller products, for example, the size of mobile phones, has been reduced drastically just because of this technology.
Cable harness assembly can also be called as cable harness or cable assembly or wiring loom. It can be best described as sequence of strings of cables or wires that are able to transmit operating currents or informational signals. The cables in cable harness are bounded with cable ties or electrical tape. This cable harness assembly is commonly used in constructive machinery and cars. It provides many advantages as compared to loose wires or cables. For example, airplanes contain wires and cables that are kilometers long but by binding them it makes them more secure and safe. Moreover this cable system is easy to install than other systems.
Quad Flat Package or QFP is an integrated circuit that includes leads extending from all four sides. It is mostly used in surface mounting devices, QFP socket is a rare thing and through-hole mounting is impossible. There are different versions from 32 to above 200 pins with pitch ranging from 0.4 to 0.1 mm. The package that is in relation with QFP is similar to PLCC but it has pins with larger pitch mostly used in NOR flash memories.
About the Author
For more details on surface mount components, cable harness assembly, QFP socket you can visit http://www.pcbassemblydepot.com/
Socket Harness
 |
 MERCEDES BENZ 115V SOCKET OUTLET WITH CUT HARNESS  US $55.00
|
 H13 9008 XENON HID BALLAST POWER WIRE CABLE PLUG N PLAY WIRE HARNESS SOCKET 2PCS US $39.48
|
 10 PACK 12 VOLT 30 40 AMP BOSCH TYCO TYPE SPDT AUTOMOTIVE RELAYHARNESS SOCKETS US $19.99
|
 30 40 Amp Single Relay Socket w Wiring Harness 12V US $18.00
|
 84814 Ford Front Rear Socket Repair Harness 1993 up US $14.99
|
 Omega DLS V 10 Wire Relay 10 Prewired Plug Harness US $7.79
|
 Dual DLS 10 Wire Relay 12 Prewired Plug Harness NEW US $6.79
|
 AU Socket 5 5 Wire Relay 16 Prewired Plug Harness NEW US $4.99
|
 H13 9008 XENON HID BALLAST POWER WIRE CABLE PLUG N PLAY WIRE HARNESS SOCKET 1PCS US $4.99
|
 12 V 30 40 AMP RELAY WITH 5 WIRE SOCKET HARNESS SPDT US $4.72
|
 CAR ELECTRONICS 5 WIRE SOCKET HARNESS RELAY FOR 40 AMP 12V RELAY 5 PINS PLUG US $3.99
|
 Omega Relay 12 volt Prewired 5 Wire Socket Harness US $3.72
|
how do the wires go back in the sockets? PLEASE HELP?
I have a 2001 dodge durango with a 5.9 and rear a/c someone ripped my stereo out and when they did they ripped the a/c control box from the wiring harness i still have the a/c control box i have no warranty and dodge wants boocoo money for schematics i just need to know the order of how the wires go bck into the connector that clips into the back of the a/c controler. PLEASE HELP.
go to a wrecking yard and coppy it from there or clip off the wires and bring them home to use as a referance